High Speed Double Ended Drill Bits Fractional Black Oxide, HSS-G Double-Ended Metal Drill Bit, Fully Ground HSS Titanium Coated Double Ended Twist Drill Bit, HSS SAE Straight Shank Stubby Double-End Drill Bits, Drill Bit Double Ended Straight Shank Hand Tool for Body Panel/Car Repairs, Double Ended Shank, Double End Drill Bit Hss Straight Shank Twist Bits for Metal Drilling Holemaking, 4341 cobalt hss double ended drill bits, Woodworking Metalworking & Multipurpose Drill Bits China Supplier Factory
High Speed Double Ended Drill Bits Fractional Black Oxide Technical Specifications
High Speed Steel Double Ended Drill Bits in fractional sizes
M2 High Speed Steel Double ended drill bits are versatile tools that have cutting edges on both ends, allowing them to perform multiple drilling tasks without the need for frequent bit changes.
Great for roofing work, automotive body work, industrial, automotive, carpentry work and drilling pilot holes.
1/4″ Flute Length.
135° split point works to keep drill bits centered and fast cutting
With a double-ended drill bit, you essentially get two drill bits in one.
Pack of 12
3/32″ Double Ended High Speed (Pack of 12)
7/64″ Double Ended High Speed (Pack of 12)
1/8″ Double Ended High Speed (Pack of 12)
9/64″ Double Ended High Speed (Pack of 12)
5/32″ Double Ended High Speed (Pack of 12)
3/16″ Double Ended High Speed (Pack of 12)
7/32″ Double Ended High Speed (Pack of 12)
1/4″ Double Ended High Speed (Pack of 12)
5/16″ Double Ended High Speed (Pack of 12)
Weight .002 lbs
High Speed double end size:
3/32″ Double Ended High Speed (Pack of 12), 7/64″ Double Ended High Speed (Pack of 12), 1/8″ Double Ended High Speed (Pack of 12), 9/64″ Double Ended High Speed (Pack of 12), 5/32″ Double Ended High Speed (Pack of 12), 3/16″ Double Ended High Speed (Pack of 12), 7/32″ Double Ended High Speed (Pack of 12), 1/4″ Double Ended High Speed (Pack of 12), 5/16″ Double Ended High Speed (Pack of 12)
What is a Drill Bit? 1/4″ Black Oxide Coating High Speed Steel HSS Double End Drill Bit
A drill bit is a cutting tool that’s fitted into a power drill and used to cut holes in materials. They come in a wide variety of shapes and sizes, but they all have similar parts as follows:
Point: the top, cone-shaped part of the drill bit that consists of a spur and cutting lip.
Spur: this sits at the top centre of the point. It helps to get the drill bit into position.
Cutting lip: the part of the drill bit that cuts the material. Golden Finishing HSS 135° Split Point Double Ended Drill Bit
Flutes: a spiral channel that runs from the cutting lip to the shank. It helps to remove the material as it’s cut from the hole.
Shank: this part of the drill bit slots into the drill’s chuck. There are several shank types which we will cover later in this drill bit guide.
The part that differs between drill bit types is usually the cutting lip. Their different designs make some more suited to cutting through certain materials than others. There are also different designs depending on the power drill they need to fit, and the type of hole being drilled.
What Drill Bit to Use? 5/32″ Black Oxide Finish Double-Ended HSS Drill Bit
Before buying a drill bit, it’s important to consider what you need it for. You can purchase multi-purpose drill bits, but you’ll get better results by using one specifically designed for the material and type of hole being drilled.
A drill bit’s suitability for drilling into certain materials usually depends on what the drill bit is made from and coated with. The drill bit guide below describes the main options:
Drill bit materials:
High-speed steel: made from carbon steel with chromium and vanadium additives. It’s suitable for drilling wood, plastic and soft metals. 5/32″ Black Oxide Finish Double-Ended HSS Drill Bit
Cobalt: an incredibly strong alloy metal used to drill through tough materials. It can withstand heat and resistance and is the best drill bit for stainless steel.
Carbide-tipped: one of the hardest materials on the planet, this drill bit only uses carbide on the tip. It’s suitable for drilling masonry, tiles and concrete.
Solid carbide: a drill bit as described above, but it’s made entirely from carbide. It’s suitable for drilling into tough materials. Black Oxide Coated High Speed Steel Double Ended Drilling Bit 9/64″
Tungsten carbide: made from a mix of tungsten metal and carbon. It’s even more hard-wearing than the standard carbide above. It is suitable for drilling into extremely tough materials such as masonry. Gold Finish HSS 135° Split Point Double Ended Drill Bit Black Oxide Coated High Speed Steel Double Ended Drilling Bit 9-64
Drill bit coatings:
Black oxide: this coating helps drill bits retain lubricants and prevent rust from forming.
TiN: a titanium nitrate coating that slows down wear and tear on drill bits designed to cut metal.
TiAIM: a titanium aluminium nitrate coating that increases resistance to abrasion and heat on drill bits designed to cut metal.
SG: a silicone coating that helps a drill bit penetrate dense metals. Black Oxide Finish HSS 135° Split Point Double-Ended Drill Bit
| Double Ended(Metric Size) |
|
Diameter
|
Flute Length
|
Overall Length
|
Diameter
|
Flute Length
|
Overall Length
|
Diameter
|
Flute Length
|
Overall Length
|
Diameter
|
Flute Length
|
Overall Length
|
|
mm
|
mm
|
mm
|
mm
|
mm
|
mm
|
mm
|
mm
|
mm
|
mm
|
mm
|
mm
|
|
3.0
|
10
|
46
|
4.1
|
13
|
55
|
5.2
|
16
|
62
|
8.0
|
25
|
79
|
|
3.1
|
10
|
46
|
4.2
|
13
|
55
|
5.5
|
19
|
66
|
8.5
|
25
|
79
|
|
3.2
|
10
|
49
|
4.5
|
16
|
58
|
6.0
|
19
|
66
|
9.0
|
25
|
84
|
|
3.3
|
10
|
49
|
4.8
|
16
|
58
|
6.5
|
21
|
70
|
9.5
|
25
|
84
|
|
3.5
|
13
|
52
|
5.0
|
16
|
62
|
7.0
|
23
|
74
|
10.0
|
25
|
89
|
|
4.0
|
13
|
55
|
5.1
|
16
|
62
|
7.5
|
23
|
74
|
|
|
|
|
|
| Double Ended(Inch Size) |
|
Diameter
|
Flute Length
|
Overall Length
|
Diameter
|
Flute Length
|
Overall Length
|
Diameter
|
Flute Length
|
Overall Length
|
Diameter
|
Flute Length
|
Overall Length
|
|
inch
|
inch
|
inch
|
inch
|
inch
|
inch
|
inch
|
inch
|
inch
|
inch
|
inch
|
inch
|
|
3/32″
|
9/16″
|
1-3/4″
|
9/64″
|
5/8″
|
2″
|
7/32″
|
11/16″
|
2-3/8″
|
11#
|
11/16″
|
2-1/4″
|
|
7/64″
|
5/8″
|
1-7/8″
|
5/32″
|
5/8″
|
2-1/16″
|
1/4″
|
7/8″
|
2-1/2″
|
20#
|
5/8″
|
2-1/8″
|
|
1/8″
|
5/8″
|
2″
|
3/16″
|
5/8″
|
2-13/16″
|
10#
|
11/16″
|
2-1/4”
|
30#
|
5/8″
|
2″
|
